Skein 10 Zoom Loom Squares - Finished!

My skein 10 was thicker than Skein 7, so I used my Zoom Loom and made squares.  It worked quite well, although weaving the final weft was a bit challenging at time due to the thicker yarn, so sometimes I had to resort to sewing the weft, but they came out great.

Skein 7 Turtle Loom Hexies - Finished!

I finished up the rest of Skein 7 making hexies on my Turtle Loom.  It was a lot of fun and I got pretty good at it by the end.  I have no idea what these will become, for now I will continue to use up my handspun on my pin looms and collect pieces.

Foxgloves - Finished!

This was a super quick knit - three days.  And I still had yarn left over.  I used about 2/3rd of my skein 10 of my handspun.  As a reminder, this is the yarn that I used.

They fit perfectly, and I got to use my mitten blockers for the first time!  There are even little inserts for the thumbs.

Pattern:  Foxgloves by Clara Parks

Yarn:  Handspun

Needle:  US 3 (3.25 mm)

Foxgloves - One Mitt Done (Almost)

Well, I still have to work the thumb, but most of the knitting is done.  I’m going to knit the second mitt and then do both thumbs.  This is more of my handspun, the next skein in the line-up to get used, Skein 10.  I have been trying to be diligent about using my handspun in a project soon after it is made.  The last thing I need is more stash accumulation.  It took me two tries to get the fit right.  The first time I mostly followed the pattern, except that I extended the thumb gusset far beyond what the pattern called for.  But when I got up past that point I tried it on and realized that the cuff was too long and that I was at risk of running short of yarn if I didn’t make some mods.  Here is a picture of the first attempt.

You can see how much cuff there is.  So I ripped it all the way back and started over, starting the thumb gusset early.  The pattern has you put the thumb stitches on waste yarn after you finish the increases, but that would have left me with a very short thumb gusset, and I have a long palm and a muscular thumb.

Even after shortening the cuff, it is still substantial.  I know that if I had knit the pattern exactly as written it would not have fit my hand, at all.  Fortunately I have no qualms about on the fly modifications.

This is the skein that I used.  It was spun on my Kromski at 12:1 and plied on my Kiwi at 9.5:1.  I ended up with 135 yards, and 86.4 grams, or 1.56 yards/gram.   I dyed it using my Wool Tincture Dyes kit, and the color is Plum.

Pattern:  Foxgloves by Clara Parks from the book Brave New Knits

Yarn:  Handspun, Skein 10

Needle:  US 3 (3.25 mm)

Spinning Report - Skeins 15 and 16

After finishing up Skein 14 I saw that I didn’t have that much left of my latest bag of Heinz 57 so I decided to spin it up and keep working on my drafting and also the fineness of my singles.  The top was a bit more than I typically spin on a bobbin (I did not weight it, but have calibrated my eye for how full I like my bobbins to get about 40 grams of single per bobbin) so when I reached that point and still had fiber left I did another bobbin.  This gave me four bobbins, two with about 40 grams and two with about 15 grams.  First I plied up the two 40 gram bobbins and ended up with this beautiful skein of fingering weight yarn.  It came in at 82 grams and 347 yards, or 4.21 yards/gram.  Spun on my Kromski at 16:1, plied on my Kiwi at 15:1.

After finishing that skein I took the two bobbins that had the smaller amount, and the leftovers from Skein 14 and weighed them all.  Then I put them on my Lazy Kate (lightest at top, heaviest at bottom) and made my first 3-ply yarn.  Spun on my Kromski at 16:1, plied on my Kiwi at 7.5:1.

It came out perfect.  100 yards, 36.5 grams, or 3.65 grams/yard.  I posted a picture of it in the Sheepspot Guild for the Friday spinning check-in, and was recognized in the spin of the week.  The challenge for May was a new to you ply, and this was mine.  I haven’t dyed it yet and I want to make some more 3-ply.  I’m thinking colorwork socks, but we’ll see what I end up doing with it.  I’m getting a little faster with the plying, still syncing my treadling with my drafting, but settling in to a nice rhythm.

Spinning Report - Skein 14

After finishing up those beautiful dyed tops that I had bought, I went back to the undyed Heinz 57 top and also dropped down to a smaller whorl (I had been working on my 12:1 ratio whorl, but have now switched to my 16:1 whorl).  Still working short forward draft, and trying to spin as thin and consistent a single as I could.  Here is the first bobbin.

It was not a fast spin, and the single on my second bobbin was definitely thinner than the first, as I had a fair bit left over (for me) even though the weight of the singles on each bobbin was comparable, and my final skein was only 68 grams (I usually shoot for about 80 grams).

I also put my smaller whorl on my Kiwi for plying (15:1).  I had a few issues with the plying - I did have a break on my first bobbin, but was able to rejoin it into the plied yarn okay (a better join than I’ve typically been able to do), but I also had some resistance from the wheel - so I decided it needed a drop of oil.  Unfortunately the oil bottle that came with my Kromski was 10 years old, and the plastic was the old plastic that grows brittle with age (and with exposure to oil, I suspect) and the bottle cracked when I squeezed it.  I thought that I had only gotten oil on my hands, but apparently I had also gotten oil on my drive wheel and more importantly on my drive band, but I didn’t realize that at the time.  No, I kept plying, and wondering where the strange noise was coming from, and why it wasn’t treadling as easily as it should.  I managed to finish the plying, and only after the skein was soaking did I take a look at the wheel and figure out all that had happened.  I cleaned everything up and wiped everything down, and treadled it for a few minutes, and it should be fine now.  Fortunately I had bought a new maintenance kit for my Kromski and it came with a new bottle of oil in a plastic bottle that is the better plastic.  I saved the old oil in a sealed container, and the application tip, which is really long.

I dyed the skein in Wool Tincture Dyes, in the color Deep Water.  It is a very uniform dye job, which made me happy, but that is probably because the dye packs and the jar is geared for a 100 gram skein, and mine was only 68, so it had plenty of room.  The yarn came out at a sport weight, although there are stretches that are thinner and some that are thicker.  Even with the challenges, I am happy with the result.

Skein 14:  240 yards, 68.1 grams or 3.5 yards/gram

More Spinning!

After spinning up the Zen Yarn Garden fiber (spin 6), I went back to the Heinz 57 fiber and focused on spinning up two full bobbins, trying to spin consistent thin single.  I ended up with about 103 grams / 255 yards of yarn, which I dyed using the Malbec.  I still had some paler spots, these were co-located with the ties, even though I tried to tie them loosely.  I might try using this yarn as the weft in some weaving.

Next, I pulled out some fiber that I had recently received from Paradise Fibers as part of their Fiber Club.

The fiber is called Girl with Pearl Earring, and contains 54% merino, 40% Kid Mohair, 6% Stellina.  It was a bit of a tricky spin for me, and I ended up with thicker singles - every time I tried to go thin it would go too thin and break.  I’m not sure what I would make with it.  The fiber club came with two fibers, and I’m still spinning up the second one, but I do have a sample.

The yarn is multicolored, and I’m not trying to do any sort of color management.  It is 60% Extra Fine Merino, 25% Baby Alpaca, 15% Tussah Silk.  This one came out a bit thicker as well, although I have spun another third of the fiber and the single has come out thinner, so maybe I’m getting a bit better.

All of these were plyed on my new wheel, an Ashford Kiwi 3.

I’ve set it up across the room from my Kromski.  It is wonderful to ply on.  On my Kromski my treadling is slow, but on the Kiwi I am fast, and the plying goes quickly.  I also bought a second niddy noddy, as the one I have only makes shorter skeins.  When I tackle long draw I will do that on the Kiwi, as my setup with the Kromski doesn’t really lend itself to those sort of arm movements.

Jezebel Blankie - Finished!

Well, not really a blanket, but a sleeping spot for a kitty that loves to curl up on my knitting and crochet projects.

I started working on this back on February 28, and finished it up on March 3.  It contains my first 5 efforts at spinning.  The Turquoise is my first and second spins, the Eggplant, my third, the Deep Water my fourth, and the Malbec my fifth.

I like the fact that you can see the improvement in my spinning in the piece itself, and yet all of it was usable.

Pattern:  Easy 4 Colour Log Cabin Blanket by Haley Waxberg

Yarn:  Heinz 57 fiber from The Woolery, handspun

Needle:  US 6 (4.0 mm)